The 110,000 brushless motors modulate the sharp high frequency noise to the frequency that the human ear cannot perceive, and optimize the noise reduction up to 60 times. The impeller dynamic balance precision to 0.3mg, noise 62.8 dB, soft wind does not stimulate the ears, so that you can enjoy a better dry hair experience.

Please check the air nozzle and the air nozzle of the hair dryer for other foreign bodies, and remove them. When the air nozzle is used, it may fall off due to large external force. You can install it again for use.

The air inlet filter screen under the handle should be removed regularly (the built-in fine filter screen can be wiped) for cleaning. It can be cleaned with a dry lint-free cloth or a soft brush. Do not wash with water.
[Precautions]
1. All the protective film on the fuselage should be removed before use to ensure the normal operation of the machine, especially the protective film on the handle.
2. In case of sudden power failure, it is necessary to turn off the machine and unplug the power supply, wait for the power supply again, and then plug in the power supply to use the machine.

Most of the material of the hair dryer industry is plastic products, general high temperature use, may have a little taste, in search of Hair Glory high speed hair dryer with non-toxic and harmless environmental protection and high temperature resistant material, can be assured to use.

The power cord and plug of good quality electrical appliances will not be hot in the normal use process. The warm phenomenon of large power electrical appliances used for a long time is normal, please rest assured.

Please try to press the "Mode button" up and down, left and right, to prevent the button stuck, if not, please send back for repair.

Normally, the heating wire will not redness. If there is redness, it is recommended that you turn off the power in time, and check whether there is foreign matter and clean it up. If not, please send it back for repair.

Check the air outlet and air intake for foreign bodies, and restart the machine after confirming that there is no abnormality.If not, send it back for repair

Check whether the used voltage is too low or too high. If it is too low or too high, the machine cannot run normally.

1. Check whether the power supply is normal, and whether there is power failure, line fuse blown, plug not plugged in or loose during the use of the hair dryer.
2. Check whether the line voltage at home is too low (below 187V). Low voltage may cause the hair dryer to stop running.
3. Turn off the machine and unplug it to check whether there are foreign bodies in the air inlet and outlet. Foreign bodies may cause the hair dryer to fail to operate.
4. If there is no working phenomenon in the working process, the hair dryer may be overheated due to the blockage of the air inlet or outlet of the hair dryer. When the hair dryer is overheated, it will automatically stop for protection.